Home - Hardware - Reloads - Where to Buy - Photos - Casting Tube / Liner Sets
Hardware Description |
Price |
| 98mm 11000Ns - complete motor ** |
$495 |
| 98mm 11000Ns - case only (34.25" long) |
$275 |
| 98mm 11000Ns - graphite nozzle |
$150 |
| 98mm 11000Ns - forward bulkhead - plugged |
$75 |
| 98mm 11000Ns - stainless steel nozzle washer |
$15 |
| 98mm 11000Ns - snap rings |
$10 |
| 98mm 11000Ns - thrust ring |
$20 |
| 75mm 2500Ns - complete motor ** |
$225 |
| 75mm 2500Ns - case only (14.50" long) |
$110 |
| 75mm 3500Ns - complete motor ** |
$250 |
| 75mm 3500Ns - case only (19.60" long) |
$135 |
| 75mm 6000Ns - complete motor ** |
$285 |
| 75mm 6000Ns - case only (30.90" long) |
$175 |
| 75mm 7600Ns - complete motor ** |
$375 |
| 75mm 7600Ns - case only (40.90" long) |
$200 |
| 75mm 2500Ns graphite nozzle |
$70 |
| 75mm 3500Ns graphite nozzle |
$75 |
| 75mm 6000Ns graphite nozzle |
$85 |
| 75mm 7600Ns graphite nozzle |
$90 |
| 75mm 2500Ns or 3500Ns forward bulkhead - smoke |
$75 |
| 75mm 6000Ns or 7600Ns forward bulkhead - plugged |
$50 |
| 75mm spacer set for 75/6000 motors in 75/7600 hardware **** |
$?? |
| 75mm spacer for 75/2500 motors in 75/3500 hardware |
$35 |
| 75mm stainless steel nozzle washer |
$20 |
| 75mm snap rings - per pair |
$7 |
| 75mm thrust ring |
$20 |
| 54mm 1050Ns - complete motor ** |
$135 |
| 54mm 1050Ns - case only (12.85" long) |
$65 |
| 54mm 1400Ns - complete motor ** |
$145 |
| 54mm 1400Ns - case only (15.85" long) |
$75 |
| 54mm 1750Ns - complete motor system *** |
$250 |
| 54mm 1750Ns - complete motor ** |
$155 |
| 54mm 1750Ns - case only (19.35" long) |
$85 |
| 54mm 2550Ns - complete motor ** |
$165 |
| 54mm 2550Ns - case only (28.66" long) |
$95 |
| 54mm graphite nozzles - specify 1050 or 1400 |
$35 |
| 54mm graphite nozzles - specify 1750 or 2550 |
$40 |
| 54mm forward bulkhead - smoke |
$40 |
| 54mm forward bulkhead - plugged |
$30 |
| 54mm spacer for 54/1050 motors in 54/1400 hardware |
$25 |
| 54mm spacer for 54/1400 motors in 54/1750 hardware |
$25 |
| 54mm spacer set for 54/1050 & 54/1400 motors in 54/1750 hardware |
$40 |
| 54mm stainless steel nozzle washer - specify motor |
$10 |
| 54mm snap rings - per pair |
$5 |
| 54mm thrust ring |
$10 |
| 38mm 390Ns - complete motor ** |
$80 |
| 38mm 390Ns - case only (9.80" long) |
$50 |
| 38mm 640Ns - complete motor ** |
$90 |
| 38mm 640Ns - case only (14.55" long) |
$60 |
| 38mm 780Ns - complete motor ** |
$100 |
| 38mm 780Ns - case only |
$70 |
| 38mm graphite nozzles - specify 390, 640, or 780 |
$30 |
| 38mm forward bulkhead |
$28 |
| 38mm stainless steel nozzle washer |
$7 |
| 38mm snap rings - per pair |
$3 |
| 38mm thrust ring |
$5 |
** A complete motor contains one each of the following:
Motor casing, forward bulkhead, graphite nozzle, stainless steel nozzle washer, thrust ring, 2 snap rings.
*** The 54/1750 complete motor system contains one each of the following:
54/1750 motor casing, forward bulkhead, 3 graphite nozzles (1750,1400 and 1050), both 54mm spacers, stainless steel nozzle washer, thrust ring, 2 snap rings.
**** The 75mm spacer set for the 75/7600 hardware contains two spacers.
Use both in the 75/7600 hardware to fly 75/6000 reloads or one in the 75/3500 hardware to fly 75/2500 reloads.
Last updated on December 1, 2011
Webmaster